• Best of luck to the class of 2024 for their HSC exams. You got this!
    Let us know your thoughts on the HSC exams here
  • YOU can help the next generation of students in the community!
    Share your trial papers and notes on our Notes & Resources page

Medical Science/ Engineering (1 Viewer)

Haku

Member
Joined
Nov 12, 2004
Messages
779
i am really interested in doing this course, well because it got three of the most elite words in it, as well as interest.

but i was looking in the papers on jobs, but couldn;t see any that is in need to a degree in that.

so just asking what kind of job opportunities are there for the course, as the UAC guide is too general and unrealistic..
and what is it like doing that course?


any suggestion of a better joint course at usyd with engineering, economics or science degrees
 

~*HSC 4 life*~

Active Member
Joined
Aug 15, 2003
Messages
2,411
Gender
Undisclosed
HSC
N/A
engineering = lots of jobs

medical science = not so many jobs i don't think, but a good stepping stone for another medical related degree.

you could do engineering/science or something, you can even do engineering and law, its up toyou
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
The job opportunities would be similar to if you did BE or BMedSc, although with the BMedSc you might be looking at mechanical (biomedical) for the BE.

As with the stand alone BMedSc degree, I personally believe that the BSc (Adv) is much better. It allows much more flexibility in the science area, while getting pretty much the same degree. Hence I would suggest you have a look at the BE BSc combined degree as well, and think about the reason why you want to do BMedSc. I'm not saying you shouldn't do it, but just that if you are not absolutely certain that you want to do it the BSc (Adv) offers much more flexibility.

As for engineering, any particular stream you're looking at?
 

nit

Member
Joined
Jun 10, 2004
Messages
833
Location
let's find out.
Gender
Male
HSC
2004
with that combination of majors, it appears that you'd be suited to a biomedical engineering degree as templR has suggested. I haven't really met anyone combining BMed(Sc) with engo, but it's natural in some ways i guess.
 

tennille

...
Joined
Nov 2, 2003
Messages
3,539
Location
Sydney
Gender
Female
HSC
2004
It doesn't necessarily have to be BSc (adv). Just BSc in general would be a good combination with engineering. BSc (adv) allows you to do adv subjects, though.

BSc, as was mentioned earlier, is much more flexible. If you're interested in the medical side of things, I suggest majoring in anatomy, physiology, biology, biochemistry, etc in the BSc side of the degree.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
Templar said:
The job opportunities would be similar to if you did BE or BMedSc, although with the BMedSc you might be looking at mechanical (biomedical) for the BE.

As with the stand alone BMedSc degree, I personally believe that the BSc (Adv) is much better. It allows much more flexibility in the science area, while getting pretty much the same degree. Hence I would suggest you have a look at the BE BSc combined degree as well, and think about the reason why you want to do BMedSc. I'm not saying you shouldn't do it, but just that if you are not absolutely certain that you want to do it the BSc (Adv) offers much more flexibility.

As for engineering, any particular stream you're looking at?
thanks for the info, so it basically saying that medscience is kinda broad, and narrow in job opportunity while BSc(ADv) is better, so when u de BSc do you have to choose like that area you specialise?
for engineering, it is also a really broad area, what kind of engineering would be a good combo with BSc or BMedSc? is combining engineering with BSc even a good idea?
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
There is nothing wrong with BE BSc. I'm doing it, withoutaface is also doing it and I'm sure both of us would agree it's a good degree.

BSc has more flexibility and a much wider range of majors. It would help if you have a change of heart later on. As for BE, there are many streams on offer. If you are doing BMedSc Mechanical (Biomedical) seems to go along pretty well, although you might want a BE major different from med science.

USyd does offer a flexible first year program, but from experience it is pretty bad in persuading which stream you wish to enter.
 

withoutaface

Premium Member
Joined
Jul 14, 2004
Messages
15,098
Gender
Male
HSC
2004
nosadness said:
thanks for the info, so it basically saying that medscience is kinda broad, and narrow in job opportunity while BSc(ADv) is better, so when u de BSc do you have to choose like that area you specialise?
for engineering, it is also a really broad area, what kind of engineering would be a good combo with BSc or BMedSc? is combining engineering with BSc even a good idea?
Just about any engineering goes well with a BSc, but it depends on where your interests lie. If you're interested in medical type things go biomed, if you like chem go chemical engineering, if you like physics/maths go something from aeromech or civil faculties and if you like electronics and programming I'd suggest that something from the UNSW CSE faculty would interest you.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
thanks for the reply, that helped heaps in understanding on the subject and wat to choose.

last question is B Engineering (space) have a possibility of finding job in aus? as i have not heard of australia space agency for space developement program.
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
Chemical engineering actually has very little resemblence to chemistry.

With the space program, I'm not exactly too sure, but it is pretty certain that job opportunities will be better overseas. I think that with the degree you're still qualified as a normal mech/aero etc engineer. The BE (Mechanical) (Biomedical) degree is good in the fact that you are both a qualified biomedical and mechanical engineer.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
Templar said:
Chemical engineering actually has very little resemblence to chemistry.

With the space program, I'm not exactly too sure, but it is pretty certain that job opportunities will be better overseas. I think that with the degree you're still qualified as a normal mech/aero etc engineer. The BE (Mechanical) (Biomedical) degree is good in the fact that you are both a qualified biomedical and mechanical engineer.
so BSc(biomechanical)/BE(mechanical) would be a good combo right? so i can work in areas of science on biomechanical stuff(wat stuff is biomechanical?) and in normal engineering field of mechanics ie: mech/aero/machinery engineer right?
i am just dreaming of the possiblities of this degree?
 

withoutaface

Premium Member
Joined
Jul 14, 2004
Messages
15,098
Gender
Male
HSC
2004
nosadness said:
thanks for the reply, that helped heaps in understanding on the subject and wat to choose.

last question is B Engineering (space) have a possibility of finding job in aus? as i have not heard of australia space agency for space developement program.
Space graduates can generally find work in the field of their other specialisation, or many also work as defence contractors for either the military directly, or companies such as Lockheed Martin who provide weapons for the military.

so BSc(biomechanical)/BE(mechanical) would be a good combo right? so i can work in areas of science on biomechanical stuff(wat stuff is biomechanical?) and in normal engineering field of mechanics ie: mech/aero/machinery engineer right?
i am just dreaming of the possiblities of this degree?
No he means biomedical engineering, which is a specialisation of biomedical, in much the same way that aero/space, mech/space and mtrx/space are specialisations of aero, mech and mtrx respectively.
 

Templar

P vs NP
Joined
Aug 11, 2004
Messages
1,979
Gender
Male
HSC
2004
withoutaface said:
No he means biomedical engineering, which is a specialisation of biomedical
I think you meant biomed engineering is a specialisation of mechanical.
 

#4

Member
Joined
Jul 31, 2004
Messages
86
Location
SYDNEY
Gender
Male
HSC
2004
nosadness said:
so BSc(biomechanical)/BE(mechanical) would be a good combo right? so i can work in areas of science on biomechanical stuff(wat stuff is biomechanical?) and in normal engineering field of mechanics ie: mech/aero/machinery engineer right?
i am just dreaming of the possiblities of this degree?
biomechanics isnt the easiest field to find work in.
The AIS has a good biomechanics department but it is really hard to get into. I read that you have to spend years in the lab doing helping the top dogs before you can become a 'biomechanist'. I also read on there site that you need a PHD. i'm sure if you google it you could find some good info
 

allstarr69

Member
Joined
Feb 7, 2004
Messages
225
i do eng combined with med science but im not sure if i want to keep this coz im not sure if im into medicine, tho i better decide soon!
With this combination your really forced to do biomedical or else they completely dont go together. Ill either keep med science and try do biomedical or drop med science all together and either try to pick up commerce or just do a single degree.
 

yulia

i'm sorry for your face.
Joined
Dec 7, 2003
Messages
504
Location
somewhere better than you
Gender
Female
HSC
2004
Be prepared for a lot of time spent at uni. A guy in my bio group does this course, it was impossible trying to do a group assignment with him because he ALWAYS had class.
 

physician

Some things never change.
Joined
Oct 21, 2004
Messages
1,432
Location
Bankstown bro
Gender
Male
HSC
2005
Allstarrr said:
i do eng combined with med science but im not sure if i want to keep this coz im not sure if im into medicine, tho i better decide soon!
With this combination your really forced to do biomedical or else they completely dont go together. Ill either keep med science and try do biomedical or drop med science all together and either try to pick up commerce or just do a single degree.
I also want to do this degree...
however, r u saying It probably won't give me a good opportunity to do mechatronic engineering from the degree...

Biomedical is one of my preferences.. however i'd prefer getting into mechatronic.. as for medical science.. i wanna get into medical research...

????... help ... please?
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
is a double degree that much useful? or would it be better to do a single degree in engineering or science area for 3 years and do 1 year honours and 1 year phD.

same time required of five years.

also what is the uai last year for BE/BSc(ADV). the uac guide only have the combined with BSc which is like 91.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top