Chem Prac: Comparing pH of strong and weak acids (1 Viewer)

let.me.die

New Member
Joined
Sep 27, 2004
Messages
28
Gender
Undisclosed
HSC
2006
i was wondering if someone could explain to me something in my prac. using a ph probe we measured the pH of HCl and acetic acid at 0.1 and 0.01M. but i got a pH of 2.3 for HCl at 0.1M. i thought that HCl was a strong acid and would ionise completely so shouldnt it have a pH of 1? could someone explain this please.

we also had to calculate [H+] of the HCl and acetic acid. why is it that there is a higher [H+] at 0.01M than at 0.1M?

i would appreciate it if anyone could explain this to me.
 

Riviet

.
Joined
Oct 11, 2005
Messages
5,593
Gender
Undisclosed
HSC
N/A
let.me.die said:
we also had to calculate [H+] of the HCl and acetic acid. why is it that there is a higher [H+] at 0.01M than at 0.1M?
It shouldn't be.... if you use the formula for calculating pH, -log10[H+], -log(0.01)=2 and -log(0.1)=1. Remember that a pH of 1 is more acidic than a pH of 2, ie a higher conentration of H+ ions.

I'll let someone else answer that first question you had. :)
 

desmond.thai

Member
Joined
Mar 9, 2006
Messages
34
Gender
Male
HSC
2006
It could be possible that the HCl solution you used was old and may have lost its acidity.
 
P

pLuvia

Guest
Also, you might have contaminated it with another substance
 

insert-username

Wandering the Lacuna
Joined
Jun 6, 2005
Messages
1,226
Location
NSW
Gender
Male
HSC
2006
Or your pH meter may have been incorrectly calibrated or slightly defective.


I_F
 

pkc

Member
Joined
Apr 16, 2006
Messages
155
Gender
Male
HSC
N/A
pH probes should be calibrated with 2 buffers (with buffer 2 and 7 in your case- for offset and slope), and never allowed to dry out (this is hard to guarantee in a school environment where caps can go missing or not filled with water).

Drying of the measuring glass tip will destroy the accuracy of a probe unless its rejuvenated with appropriate techniques.
 

PoppyJoy

New Member
Joined
Feb 28, 2008
Messages
3
Gender
Female
HSC
2008
Or you could have taken the reading too early
Cos the pH readings tend to decrease the longer u leave the probe in..getting more n more accurate
 

minijumbuk

┗(^o^ )┓三
Joined
Apr 23, 2007
Messages
652
Gender
Male
HSC
2008
lol don't worry. You'll never have to be asked to tell the true results in an exam. Just make up results that are theoretically right.

There could've been many sources of error in your practical, such as faulty equipment, contamination in acid, contamination on pH meter...

So yea, don't worry about this practical. Just learn the procedure of it, and make up results -they, the markers- want, not what you actually got in your experiment.
 

samwell

Member
Joined
Nov 19, 2007
Messages
400
Gender
Male
HSC
2008
does HCl dissolve with water vapour when left open in a room or does it react with atmospheric compounds like CO2. kind of confused which is which. lol.
 

cameron0110

Member
Joined
Mar 23, 2004
Messages
113
Gender
Male
HSC
2004
HCl will be slightly diluted with H2O in the atmosphere although 0.1 M HCl is so dilute it wouldn't make much of a difference at all.

The reactions with CO2 tend to be with NaOH because CO2 is an acidic oxide and so you get acid/base reactions occurring.
 

miz2nv

New Member
Joined
Mar 4, 2009
Messages
23
Gender
Undisclosed
HSC
N/A
need help 4 chem we hve 2 make a model showing
hydrochloric acid and acetic acid any help with how they will look

please help
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top