Differential equations question I can't get my head around (1 Viewer)

SDES

MUP DA DOO BIX NOOD
Joined
Jun 26, 2009
Messages
365
Gender
Male
HSC
2009
I don't even do HSC, so I'll just try posting this here. Hope it's not too big of a question to ask here:

Consider the elements A, B and C. Initially, there is 800g of A, 100g of B and nothing for C. Each second:

  • 4% of A turns into B
  • 2% of B turns into C

Hence, the following is true (where a=A, b=B):

  • da/dt = -0.04a
  • db/dt = 0.04a - 0.02b
In finding the equation for the value for b, we are given this hint:
(db/dt) + 0.02b = (1/e^[0.02t])*(d/dt)(be^[0.02t])

From this, I have so far found the following:

a=800 @ t=0; a=768 @ t=1
da/dt α a --> da/dt = ak ---working out---> a = 800e^(-0.04t)

Given that db/dt = 0.04a - 0.02b, db/dt + 0.02b = 0.04a, therefore:
db/dt + 0.02b = 0.04(800e^-0.04t) = 32e^(-0.04t)
Meaning that the right hand side of the hint is essentially equal to 32e^(-0.04t).Now I'm kinda stuck at a dead end.
Thanks in advance for any help.
I'm pretty sure there's some equation typer built into forum posts - sorry I couldn't find it.
 

Trebla

Administrator
Administrator
Joined
Feb 16, 2005
Messages
8,143
Gender
Male
HSC
2006
db/dt + 0.02b = 0.04(800e^-0.04t) = 32e^(-0.04t)
Meaning that the right hand side of the hint is essentially equal to 32e^(-0.04t).Now I'm kinda stuck at a dead end.
Thanks in advance for any help.
I'm pretty sure there's some equation typer built into forum posts - sorry I couldn't find it.
Assuming everything you've done so far is correct:
db/dt + 0.02b = 32e-0.04t
We use the technique involving an "integrating factor". Which is e∫0.02 dt = e0.02t. Multiplying the equation with this factor gives:
e0.02tdb/dt + 0.02e0.02tb = 32e-0.02t
Now the LHS is can actually be written using the reverse product rule.
Observe that d[e0.02tb]/dt = e0.02tdb/dt + 0.02e0.02tb
i.e. d[e0.02tb]/dt = 32e-0.02t
=> e0.02tb = -1600e-0.02t + c
Using the initial conditions to evaluate c and then make b the subject :)
 

SDES

MUP DA DOO BIX NOOD
Joined
Jun 26, 2009
Messages
365
Gender
Male
HSC
2009
3unitz: I understand every single step you have posted, but what I am having problems with is the integration.

32e^(-0.02t) = (d/dt)[be^(0.02t)]

integrate both sides:
(32e<sup>-0.02t</sup>)dt = d(be<sup>0.02t</sup>)
∫(32e<sup>-0.02t</sup>)dt = ∫(be<sup>0.02t</sup>)d
(32e<sup>-0.02t</sup>)/(-0.02) + C = be<sup>0.02t</sup>
-1600e<sup>-0.02t</sup> + C = be<sup>0.02t</sup>


This is mainly because I'm not that familiar with 'd/dt' and its implication.
The bolded steps I have added, are they correct? Integrating be<sup>0.02t</sup> results in itself, with no +C? Or would the integral of be<sup>0.02t</sup> instead be something like (be<sup>0.02t</sup>)/0.02?
Very confused right now, as what you show me is correct at the end (agrees with known values), but the working out puzzles me.


Trebla: from your final line,b = -1600e<sup>-0.02t</sup> + c, and from the initial conditions of 'b', I get the equation b = -1600e<sup>-0.04t</sup>+ 1700. I know from using a spreadhseet that b is about 198 at t=100, and using this equation for 'b', I get something like 1670.69.
 
Last edited:

SDES

MUP DA DOO BIX NOOD
Joined
Jun 26, 2009
Messages
365
Gender
Male
HSC
2009
Ah, my mistake, on both accounts. I should have realised d/dt just referred to the deriving of a function. And also the 'combining' of the two Cs. The last situation was just silly for me, since we were taught to just leave C alone and not do anything to it in most situations. Oh well.

Thanks for the very speedy response guys, the help is much appreciated.
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top