• Congratulations to the Class of 2024 on your results!
    Let us know how you went here
    Got a question about your uni preferences? Ask us here

Trick question? Shipwrecks and salvage (1 Viewer)

bluebiro

Member
Joined
Oct 20, 2005
Messages
46
Location
Port Macquarie
Gender
Male
HSC
2005
Was the cell diagram doing anything?

My logic being:
-1- It was an electrolytic cell as both Mg? and Fe were in the same solution.
-2- My understanding of electrolytic cells is that you need a battery to drive the reaction and there was no battery.

Seeing that it was worth 4 marks I wrote about anodes and cathodes etc saying something like the iron was oxidised....or some crap like that i cant remember,
anywho what are your thoughts?
 

muselara

Melb Uni
Joined
May 13, 2005
Messages
169
Location
bondi
Gender
Female
HSC
2005
i dunno but it turned my brain into a milkshake and after lots of thought im pretty sure whatever i ended up writing was right...
it definitely was a question to make you think...much harder than any of the 7 mark questions....it shows that amount of marks definitely doesnt mean difficulty often.
 
Joined
Nov 4, 2004
Messages
3,550
Location
Sydney
Gender
Male
HSC
2005
i think of it as this, ions more likely to be a ion so Magnesium sulfate solution conc increases, magnesium strp wears away and iron deposit forms on iron nail and iron sulfate conc decreases
 

Spadge

New Member
Joined
Mar 24, 2005
Messages
10
Location
Port Stephans
Gender
Undisclosed
HSC
N/A
I can't say this with certainty, as it's definately not my strongest suit, but I think a momre reactive metal always displaces a less active metal in solution. Therefore, the aluminium will oxidise, going into the solution, and iron solid should form. Since there are no ions less reactive than iron in solution, the iron doesn't do anything.
 

yumi_cheeseman

New Member
Joined
Aug 11, 2005
Messages
3
OMG you HAVE to be kidding me right? are you saying you have done the chemistry course, let alone the course in shipwrecks and salvage, which if u think for 2 seconds all of corrosion is BASED on the works of a galvanic cell

yes all electrolytic cells need a power source, but this is a galvanic cell (such as the "first" one created by galvani's frog legs), where the presence of an electrolyte and 2 different metals are needed.

The reason that there was Fe sulfate and Mg sulfate was to make u think which was the reaction was going. To do this u woulda had to go to the back of ur periodic table of elements, and checked which element had a greater oxidising potential. Which of course is Mg, since it is higher.

Therefore what u woulda observed in the experiment would be the corrosion of magnesium, and a build up of iron on the nail.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
what u guys taliking about?

iron would form on magnesium

but magnesium for an non porous layer so it does corrode. so nothing much would happen :)
 
Last edited by a moderator:

bluebiro

Member
Joined
Oct 20, 2005
Messages
46
Location
Port Macquarie
Gender
Male
HSC
2005
jeez lumi...sorry if not everyone is as smart as you, or as smart as you think you are. But thanx for the assistance anyway..
 

bmc

Member
Joined
Jul 15, 2005
Messages
61
Location
South of the Border
Gender
Male
HSC
2006
i took it as 2 metals of differing activity in a solution. i said iron deposit was formed on the more reactive mg and the concentration of fewhatever it was decreased whilst mg concentratoin increased if that makes sense
 

Abtari

Member
Joined
Oct 6, 2004
Messages
604
Gender
Male
HSC
2005
for those who think that iron deposits on the magnesium strip, please provide a justification, much appreciated.
 

Abtari

Member
Joined
Oct 6, 2004
Messages
604
Gender
Male
HSC
2005
yumi_cheeseman said:
Therefore what u woulda observed in the experiment would be the corrosion of magnesium, and a build up of iron on the nail.
i put down that in my answer,too.
 
Last edited:

gogogadgetbrain

New Member
Joined
Oct 28, 2004
Messages
22
Gender
Undisclosed
HSC
2008
Abtari said:
for those who think that iron deposits on the magnesium strip, please provide a justification, much appreciated.
think about it this way, if you put a magnesium strip in a beaker of iron sulfate what would happen?- the magnesium would displace the iron ions in solution

it does this by giving up an electron (Mg -> Mg2+ + 2e-) this electron cant just swim through the water it it taken up by the iron ions in solution (Fe2+ + 2e- -> Fe) this reduction occurs on the surface of the magnesium and therefor iron deposits on the magnesium

this is the same for the cell in the diagram

-well thats what my couple of highschool chemistry years inclines me to believe
 

jessd87

New Member
Joined
Mar 15, 2005
Messages
1
Gender
Female
HSC
2005
It was stupid!

Well I too think that question was stupid.....and weird! It took me ages to try and work out what the hell was going on! your not the only one...but i wrote the same as you!
 

bluebiro

Member
Joined
Oct 20, 2005
Messages
46
Location
Port Macquarie
Gender
Male
HSC
2005
the question could have been interpretted a few ways....and it could have been worded better but hey shit happens
 
Joined
Nov 23, 2004
Messages
31
Location
somewhere over the rainbow ...
Gender
Female
HSC
2005
i don't know - i talked bout how it was like cathodic protection in that a more reactive metal (magnesium) will protect the less reactive (iron) against corrosion. therefore, magnesium was like sacrificial anode and it corroded where as iron did not. Like i said - i'm not sure but @ the tiem it seemed like the most correct thing to me.
 

Haku

Member
Joined
Nov 12, 2004
Messages
779
missjelly_baby said:
i don't know - i talked bout how it was like cathodic protection in that a more reactive metal (magnesium) will protect the less reactive (iron) against corrosion. therefore, magnesium was like sacrificial anode and it corroded where as iron did not. Like i said - i'm not sure but @ the tiem it seemed like the most correct thing to me.
at the beginning of reading that question and saw it was 4 marks i thought that it would require something special.

so i wrote that Mg would produce a non porous oxide that would stop the corrosion, so nothing much happens. than i thought fuk it and went back to the normal displacement reactions. reading this, guess lucky that that i did,
 

Captain Karl

Member
Joined
Nov 2, 2005
Messages
59
Gender
Male
HSC
2005
missjelly_baby said:
i don't know - i talked bout how it was like cathodic protection in that a more reactive metal (magnesium) will protect the less reactive (iron) against corrosion. therefore, magnesium was like sacrificial anode and it corroded where as iron did not. Like i said - i'm not sure but @ the tiem it seemed like the most correct thing to me.
I came to the same conclusion, and I'm pretty sure its the right one. I dont think it required any kind of genius thinking to work it out, it just required you to know that the reaction can happen in the one beaker. I'm glad i can find a few people to agree with on this one
 

Touchstone

New Member
Joined
Oct 26, 2004
Messages
14
Gender
Male
HSC
2005
If you didn't know how to answer THIS question, you didn't study properly. Oh and Yumi Cheeseman, I think I know you! Do you go to Gosford High?
 

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

Top